-60\u00b0C to +85\u00b0C (-76\u00b0F to +185\u00b0F)<\/td>\n<\/tr>\n<\/thead>\n
\n
\n
Storage temp<\/strong><\/td>\n
-76\u00b0F to +185\u00b0F (-60\u00b0C to +85\u00b0C)<\/td>\n<\/tr>\n
\n
Humidity<\/strong><\/td>\n
0-100 % RH (Non-condensing)<\/td>\n<\/tr>\n
\n
Operating voltage<\/strong><\/td>\n
24 Vdc Nominal \u2013 (Range 18 to 32 Vdc)<\/td>\n<\/tr>\n
\n
Power consumption<\/strong><\/td>\n
3W minimum (without heater), 15 W at 32 Vdc with heater on maximum.<\/td>\n<\/tr>\n
\n
Speed of response<\/strong><\/td>\n
< 5 seconds (Typical)<\/td>\n<\/tr>\n
\n
Dimensions<\/strong><\/td>\n
100 mm Dia x 200 mm (4\u201d Dia x 8\u201d L)<\/td>\n<\/tr>\n
\n
Material<\/strong><\/td>\n
Copper free aluminum or 316 stainless steel<\/td>\n<\/tr>\n
\n
Entry size<\/strong><\/td>\n
3\/4 inch NPT or M25<\/td>\n<\/tr>\n
\n
Weight<\/strong><\/td>\n
Alu 5.5 lbs (2.5 Kg) \/ SS 13.2 lbs (6.0kg)<\/td>\n<\/tr>\n
\n
Outputs<\/strong><\/td>\n
Relay contacts (DPDT 2A at 30Vdc) \u2013 alarm and fault. \n0-20mA plus fault alerts, HART\u00ae<\/td>\n<\/tr>\n
\n
Certifications<\/strong><\/td>\n
Class 1 Div 1 Groups B, C, D T4 Ambient \u201350\u00b0C to +85\u00b0C \nClass 1 Zone 1 AEx\/Ex db IIC T4 Ambient \u201350\u00b0C to +85\u00b0C \nATEX II 2 G Ex db IIC T4 \nIECEx Ex db IIC T4 Ambient \u201360\u00b0C to +85\u00b0C \nINMETRO Ex db IIC T4 \u2013 pending \nPESO Ex db IIC T4 Ta= -60\u00b0C to +85\u00b0C \u2013 pending<\/td>\n<\/tr>\n
\n
Performance approvals<\/strong><\/td>\n
FM 3260 \nEN 54-10 \nIngress \u2013 IP67 \/NEMA type 6P \n*SIL2 certified pending \u2013 IEC 61508<\/td>\n<\/tr>\n<\/tbody>\n<\/table>","protected":false},"excerpt":{"rendered":"
The Crowcon FGard UVIR flame detector is an explosion-proof ultraviolet-infrared flame detector, offering superior detection of hydrocarbon fires which are not detectable in the visible spectrum. With adjustable sensors, the Fgard UVIR can be adapted to suit your space, and is capable of operating in even the harshest conditions.<\/p>\n